CF系列全自動高速裱卡機

配置說明

( KD-800  CF-1150A/1150C/1210/1300/1450 )

CF Series FULLY AUTOMATIC HIGH-SPEED CARDBOARD LAMINATOR

一、 機器主要功能

Main Functions

CF系列全自動高速裱卡機是我公司結合國內外同類產品的優越性能研制開發的，適用于高檔的酒盒、彩盒卡紙對裱的專用設備。本機可選配高速自動送紙、高精度調膠輪、自動追蹤規位機、人機界面自動控制，可配不停機送紙。

CF series high-speed automatic cardboard laminator is a special cardboard aligning equipment combining with advantages of domestic and foreign similar products;it is suitable for high class wine box and graphic carton.The machine is equipped with high speed automatic paper feeder, auto tracking aligning of high precise adjusting glue roller ,automatic control of man-machine interface and nonstop paper collecting.

二、 性能特點

Features

1.送紙系統：（面紙、底紙）采用先進的四吸四送飛達送紙系統，每小時送紙可達10000張，吸嘴能自由伸縮≥30mm，能使變形、卷翹紙張方便調整，調整旋扭采用鋼絲傳動調整吸嘴的高度與傾斜角度。后2個吸嘴動作配合前面2個吸嘴使卷翹的紙張高低自由調整平穩輸送到涂布機。（另可配備不停機送紙系統）正機裝薄紙張可左右調動50mm使面紙、底紙、三角板貼合保持一條線的快速調機功能。

1. Paper Forwarding System: Feeding system: It adopt advanced four-suction and four- feeding paper feeder system (upper paper, bottom paper), paper feeding speed is up to 10000 pieces per hour, the suction nozzle can be stretched 30mm freely,adjust the rolled curled papers, uses steel wire transmission adjusting suction nozzle height and tilt angle, two suction nozzles act with three front suction nozzles to adjust the curled paper level freely and transmit to coating machine smoothly. (Paper feeding system is optional)

2、主機涂布系統：高精度涂布機構上膠輪與調膠輪的控制下，涂布量最低約可調至≤0.08mm，水份指標控制在7%-12%內，提高了產品的干燥度、挺度。自動液面控制：能依紙張需求精確調節涂膠量，確保涂膠均勻。方便的紙張分離器：能將紙張即時分離上膠輪，亦便于拆散、清洗與調校。精致的輪邊檔膠，能將輪組邊的膠水刮回輪內，使高速運轉的輪邊不會溢膠，亦能調節膠水迅速回流，達到循環利用的目的。

2. COATING SYSTEM：Under control of high precision coating mechanism, the coating volume of gluing roller and glue adjusting roller can reach less than 0.08mm, moisture index can be controlled from 7% to12%, and it improves product dryness and stiffness. Automatic glue level control: accurately adjust coating volume required by different paper to ensure even gluing. Convenient paper separator: separate the paper from the gluing roller quickly and easy for dismantling, cleaning and calibration of the gluing roller, wipe the glue back to the roller to prevent roller ends at high speed from glue overflowing, and it can also adjust back flow to recycle the glue.

3、主機輸送系統：利用輸送快于規擋的速度差，將紙追抵前規擋，側方以同步方與側擋規定位，（面紙與底紙）兩紙張即可行進中準確完成側、前規位。

3. The Host Delivery System: The speed difference between faster paper delivering and front stopper moving advances the paper to reach the front stopper ,and the paper sides are aligned synchronously(upper paper and base paper with side stoppers to ensure upper and lower paper being aligned and laminated perfectly at side and front.

4、加壓輸送系統：壓紙速度與壓紙長度電動調校，尺寸轉換方便，可將貼合完成的紙張，重疊壓著，亦可加快轉速將紙張分別壓著;新增加壓輪組，能將分別壓著過的薄紙貼合成品二度重壓，使產品更加平整精美。

4. The Pressure Transmission System: the pressure of paper speed and paper length of the electrical adjustment, easy size conversion, the paper can be laminated to complete, overlapping pressing, but also speed up the paper were pressed; , Can be pressed over the thin paper paste finished second degree of weight, make the product more smooth and beautiful.

 5、收紙系統：抖松式收紙機，能將重疊壓著紙張抖松后推擠，確保整齊順暢的收紙，自動齊紙裝置，使收紙整齊。通過光電開關檢測自動收紙抖松式收紙機，能將重疊壓著紙張抖松后推擠，確保整齊順暢，增加工作效率，減少人工操作。（可配備不停機收紙系統）

5. The Delivery System: shaking loose-type delivery machine, can overlap the crimping of the paper after shaking to ensure that the neat and smooth delivery of paper, automatic paper-aligning device, so that the neat paper. Through the photoelectric switch to detect the automatic collection of paper-shaking loose-type delivery, can overlap the pressure of the paper after the shaking loose to ensure that neat and smooth, increase efficiency and reduce manual. (Can be equipped with non-stop delivery system

6、整機控制系統：采用日本三菱PLC電腦程序控制，人機界面觸摸屏，可對機器的運行狀態進行實時態監測顯示，機器調整和排除故障方便快捷。

6. Control System: Control system: use PLC computer program control, computer display, man-machine interface touch screen, monitor display for machine running in real time. Conveniently adjust and debug the machine

7、整機傳動系統：全機采用進口時規皮帶傳動，動力傳動均勻分配，高精度、免保養、低噪音、高效率。

7. Drive System: Drive system: The system allows smooth and even distribution in power drive by a complete set of imported timer belts. Free maintenance, low noise and high efficiency.

8. 調整系統：業內首創伺服自動追蹤與日本原裝精密相位調整器緊密配合，在機器高速運轉過程中可實現 ±0.5mm 內的誤差調整，大大提高生產效率。

8. Adjustment System：Domestically creates the first automatic tracking servo system and it matches Japanese precise regulator completely, which can achieve ±0.5mm error adjustment in high speed and improve productivity efficiency greatly.

三、 整機主要電氣元件配置

Main Electrical Configurations

四、主要技術參數

Main Technical Parameter

注：因產品不斷改進，技術配置、數據會有所變化，以操作說明書為準.

Note: due to the continuous improvement of products, the technical configuration and data will change, and the operation manual shall prevail.